How to get rid of the water from the flooded engine? Water in engine jetsurf?
Water in engine of jetsurf? No problem! In this new short tips&tricks
video I will show you how to get rid of the water from the flooded
engine.
It’s really not a big issue though. I use jetsurf over 1 year in the
ocean with real waves and never had to get water out of engine. If you
are careful, it never gets in! Make sure you are never sitting or
laying on the board or flip it over, and you’ll be fine!
We will cover
- Getting rid of the water from the hull
- Removing a spark plug
- Cleaning engine out of water
- 3 bonus jetsurf tips!
This method is for Jetsurf models 2017, 2018 and newer. If you have an
old board of 2015 generation and older, watch an old video by Martin
Sula here
or 2016 version
A lot of things I cover might look simple and obvious for jetsurf
experts and veterans, but could be very helpful for people who are
just starting out with jet surfing and have no experience in it!
As usual, big thanks to Luis for helping me with filming this and
Wayne Brooks from Jetboard Limited and Jeff Scott from Sussex
installations and Thomas and Vaclav from Jetsurf Factory for
consulting me about the technical part and giving me valuable advice
on the board maintenance.