Hey Steve
To ooen the Pod you need several flat screwdrivers and a handful of wedges, I used shims you buy at home depot. You just wedge a screwdriver in between the two halves of tge case and as you open it stick wedges in to hold it open . Then work your way around till its Separated there is one plug to To disconnect and you have it open. To reassemble you first have to fet all the glue and 2 sided tape off both pieces i used patience and goof off. Then to put it back together get yourself about 12 $1.00 clamps at harbor freight and some short strips of wood or metal and a tube of 3M 5200 marine sealant
When youateready to assemble out a fatbead Of 5200 along one surface of the pod halves, no gaps then spritz it with water and pust the two halves together clamp it evenly all around and let ot drt ip for ay least 24 hrs longer is better take off the clamps when done and then take the plastic screw out of the case and blow air into the pod dont let it escape and listen or feel for anY spot that has a leak If you have a leak pry that area open a little and squeeze a bit more 5200 and reclamp
5200 is self curing so you have to use it within 5/7 days
Hope that helps cheers frankie