Electric Skateboard Kit exists so you can focus on specific repairs, adjustments and upgrades.The kits available for building or customizing DIY electric skateboards typically focus on pulleys, trucks, wheels, and bearings. This is because most skaters choose to personalize their boards to achieve the required speed and performance on specific terrain.Since you may need to make other modifications, we have decided to make the purchase guide based on the main parts or components of the electric skateboard. Learn how to choose the right option for each part to make your DIY project a success:
- Deck
- Motor
- Trucks
- Wheels
Consider the following three factors when choosing a panel for an electric skateboard:
The shape of
Choosing the right shape is easy. You just need to look at the deck from top to bottom and determine the purpose of that particular shape.If you find the deck bending upward along the two trucks, that indicates the camber type. The seat of the truck will be lower than the platform on which you ride.The purpose of camber is to help you make better turns. This also allows the deck to be more flexible without touching the ground.
But there’s a problem. Radian is not the best shape for an electric board. You may have to spend more money on modifications to separate parts and make the battery’s wires longer.Next, we have stilts. This time, the curve moves smoothly down, so that the center part of the board is lower than the truck. The two trucks will have greater steering freedom.In addition, the lower deck is ideal for long distance thrusting. Why is that? Minimize tiredness in the lower extremities when you balance for long periods of time.However, the rocker arm shape is still not good enough for an electric board. Your circuit board carries electronics that may be damaged due to constant rubbing on the ground.
Similar to the stilt design is the lower deck. It is much lower than a truck, but can be easily solved with larger wheels and thinner parts.As for the concave, you’ll see it when you notice an upward curve between the two areas reserved for the feet. Balance, control and safety can be improved by fixing the toes and heels to the deck. No wonder it’s ideal for carving.
Good news – a concave deck is sufficient for an electric board. However, be sure to avoid widening the shell of the part. The elongated, elongated shell will fit perfectly under the concave.Another good shape for an electric board is a “W” shaped concave. It will provide you with two subtle jolts under your foot to support your arch. You end up with better control of the back foot.The only underside of a W-shaped concave surface is the unflat underside. It will cause installation problems, which will force you to bolt or screw the chassis to the deck.
flexible
Although you only need your eyes to see the shape of the deck, you need to be more flexible. You can check the curvature by standing on the deck and observing whether it bends or not.
Once you see a deck bent or bent, we recommend that you look for another one. As it turns out, the flexible deck is not recommended for electric skateboards.If the battery has a longer structure, the inflatable deck may be unfavourable. Too bad, because it’s much more exciting and comfortable to use when you’re rolling over rough surfaces.If you really want that irresistible bounce, there are ways to tweak the electric board assembly. Try following these tips:
Move the battery to the back of the fork.
Place the electronic speed controller (ESC) on the other end.
Wooden enclosures are used to match the elasticity of the deck.
Avoid aluminum and plastic enclosures, as they are resistant to scratching and breaking.
The wheelbase
This is the distance between the floor of the truck. It provides the space needed to install batteries, motors, controllers, on/off switches, meters, and LCD screens.
The short deck will always be a challenge, as you have no choice but to install as much as possible along the limited wheelbase. The wires alone need at least 50 millimeters of space to follow the correct wiring. Also, ESC usually requires about 100 mm.
If you like penny boards, you need to be careful when saving space. The smaller wheelbase will force you to calculate the length of the battery and the battery. You must also consider the extent to which the motor protrudes from the truck.
The engine
The pulley kits we discussed earlier are used for belt drive motors. Another variation you might consider is the hub motor. Let’s find out which one is better for the electric board.
Wheel hub motor
This type of electric slide motor is quieter and easier to install. It has a fixed position near the wheels, which is good for a more concealed position. The lack of pulleys and belts also requires less maintenance.However, the hub motor has less torque. When you try to speed up, you may feel dissatisfied. Plus, if you’re a DIY professional, you’re not limited by it.
Belt drive motor
A pair of pulleys is needed to make the belt-driven motor work. One of them is on the motor, and the other is on the wheel. Between them is a belt that will run as you ride.The belt-driven motor is ideal for DIY scooters. They will allow you to customize gear ratios and wheels. They also have higher torque for smoother acceleration.Unfortunately, you have to maintain the pulley system. On the plus side, there are many pulley kits available in stores today.
Other Points to Note
The size of the motor is different from the KV rating, so be careful. Fortunately, choosing the right motor for an electric skateboard is easy.The size is when you see the four-digit number associated with the motor. When comparing motors, the logic is simple: the higher the number, the higher the level of torque provided.
For KV ratings, the standard range for belt-driven motors is 180 to 270. The lower the rating, the greater the torque. However, if you’re purely looking for speed, choose a higher rating.For hub motors, the standard KV rating is only 75. Look, they’re quite different from the belt-drive option.
van
The truck is probably one of the most complex parts of an electric skateboard. It consists of several components. You may have to check the quality of each component to make sure it’s worth buying the kit. However, you can also purchase a set of trucks based on size and profile.
component
The axle is attached to the wheels, but must first pass through the hanger. It’s a long pin, so it’s definitely accessible to the wheel. It shall be of such length that it is parallel to the side of the circuit board.Next, the triangular component seen in the truck’s toolbox is a coat hanger. Its main function is to fix the axle.
Also, one of the most important parts of a truck is the kingpin. It’s a big bolt that holds multiple components together. It is surrounded by soft bushings to support the dynamic movement of the board.Truck parts are usually made of aluminum, steel and titanium. If you’ve been riding your scooter on rough terrain, consider using heavy metals for truck parts.
Size
In choosing the right size, you just need to check how close the axle’s width is to the deck’s. A 1/4-inch difference is fine. Here are some examples:
- 6”-7.25” axle = 6.5”-7.25” deck
- 8” axle = 8”-8.5” deck
- 9” axle = 9”-10” deck
outline
This is the distance between the truck’s hanger and the bottom of the deck. There are three types to choose from:Low = suitable for smaller wheels (50mm to 53mm), better stability when rollingMedium = is suitable for wheels from 53mm to 56mm for better performance in city skateboardsHigh = suitable for larger wheels (56mm +) on skateboards, longboards and cruisers.rims
Diameter and hardness are the basic factors to consider when choosing a wheel.
The diameter of
Please check out the following categories for advice on choosing the right wheel size:
50mm to 53mm = suitable for smaller skaters, skills and recreational skating in the park
54mm to 59mm = suitable for larger skaters, beginners and city skaters
60mm + = is recommended for longboard and all terrain skateboards
Hardness tester
When it comes to hardness, the hardness rating is a standard way of knowing which wheels are softer or harder without touching the wheels. Manufacturers usually use A ruler instead of A ruler.
Lower hardness values only indicate softer wheels. Soft wheels are slower, but they have the best grip on concrete surfaces and rugged terrain. Hard wheels, on the other hand, are ideal for smooth floors that don’t require much grip.
conclusion
Choose the right electric skateboard kit to meet your skating needs. What do you need for your own DIY scooter now? Are you currently looking for new wheels? The truck?DIYE electric slide box is one of the products you must do. Unlike the other options, this option does not include pre-drilling. You can place it according to the size and shape of the board.The store sells countless sets of skateboard parts and tools. You’ve been spending time all over the world researching what’s best for your board.