Hello there,
Can someone help me solve the problem?
My lift efoil performance is poor, i usually lift at speeds 5 to 7
Now i increase the speed to max 15
And feels like number 5, very low power to lift.
I’m new to lift e-foils
I have the 2nd generation lift efoil.
Is there a speed governor setups ?
It is a setting isue ?
I appreciate any comments and support
If you are changing gears from 5 to 15, you have already found the governor mode.
Is your propeller free of any debris? You have to bring the nose down for accelerating.
2 things to check:
is internal antenna completely screwed without any loose: remove black plastik cap (inside the inner space) and pull the linear antenna & verified everything is dry when few polystyrene get out.
on your remote controller there is a small plastik cap behind the trigger that also may become loose: press it firmly
You can also pair another remote controller to counter-check yours.
Hi there, your Lift eFoil may not be giving full power, which could be due to a setting or calibration issue. Sometimes the controller or battery settings limit power output, especially if a speed governor is active. Make sure your battery is fully charged, and check in the app if any power limits are turned on. Also, inspect your prop and motor for damage or extra drag that could slow you down. I faced a similar problem with my SUP stand up paddle setup that had an electric assist, and a quick reset along with checking the firmware solved it. Hopefully this helps you get your Lift eFoil performing properly again.