As for DLE, I am not sure why they have not updated their website, I will be launching a new site within a month.
jetboardsamerica.com
Currently my product can be found at,
DLEsurf.store
I’ll give you a basic rundown first, then I will try some pictures, I noticed as a new member it only allows me a limited mobility for the time being,
So the unit actually arrived, wet inside, with water everything covered in sweat,
Couldn’t believe it, then when I went to lift it out of the box, I noticed how heavy it is, 28 kg dry weight , it is carbon fiber, but it is assembled more like fiberglass, very thick and heavy.
Anyhow mix up some fuel, won’t start won’t start, get to looking, The pulse line for the carburetor, has already deteriorated and is rotting and cracking.
Fix that,
Still won’t start, next for the spark plug, it is completely doused in water and oil, dry that out,
Get it started in the garage, take it to the water, try running in the water, first thing I noticed, is a cavitation, pull the board and Check pump cone, and sure enough no silicone sealing the pump jet cone, repair That, noticed that in the brief moments in the water, part of the inner throttle linkage had broke,
Put the board back in the water, test again, still generates hardly any trust, barely break plane, no more cavitation,
Running board in water, noticed muffler is extremely hot. The water splashing inside of the board, is steaming off the muffler,
Then once you turn the board off or it dies, it will not restart, because it is losing spark due to the moisture inside.
The exhaust temp is so high, it melts the rear one-way valve within five minutes of water testing inside of the water.